Optima T100 Heated Circulating Bath

The Grant T100 series of general purpose heating circulating baths offer accurate temperate control for staightforward applications in the range of 0°C to 100°C. The T100 heating circulator can be used in combination with any Grant stainless steel or plastic tank or with a T-CLAMP for independent use of virtually any vertical sided tank.

  • Cooling/heating range 0°C to 100°C
  • Stability ±0.05ºC / Uniformity  ±0.1ºC
  • Tank options 5L to 38L
  • 3 programmable temperature presets
  • Low liquid protection and fixed over temperature cut-out
  • Visual alarm – alerts you when your attention is required
  • Clear, bright 4 digit LED display

Applications

  • Clinical, Microbiology and Pathology labs – media tempering, thawing and incubating samples
  • Teaching labs, higher education/universities – practical demonstration/experimentation, sample preparation

Specifications

• = standard

Dimensions (h x d x w) 333 x 172 x 120mm
Stability (DIN 12876) @70ºC 0.05±ºC
Uniformity (DIN 12876) @70ºC 0.1±ºC
Setting resolution 0.1ºC
Display 4 digit LED
Timer function
No. of temperature presets 3
Re-calibration points 2
Socket for external probe (TXPEP, TXSEP)
Communications interface
Programmable
Relays
Safety – over temperature Fixed
Fluid level – float
Language options
Alarms (can be configured to switch a relay)
Heater power – 230V 1290W
Heater power – 120V 1440W
Electrical power – 230V 1400 (50-60Hz)
Electrical power – 120V 1500 (50-60Hz)
Height above tank rim 200mm
Depth below tank rim 135mm
Maximum pressure (water)
Maximum flow (water)
Pump connector 6mm bore
Pump connector 9mm bore
Weight 2.1kg

Downloads

Product Manuals:

Technical Datasheets:

Further Information:

 

Products in range

Model Number

Unit Size

T100-ST5 5 L
T100-ST12 12 L
T100-ST18 18 L
T100-ST26 26 L
T100-ST38 38 L
T100-P5 5 L
T100-P12 12 L
T100-P18 18 L

Accessories

Accessory Cooling

Optional accessory cooling systems

Part No

Description

C1G 0ºC to 40ºC**
C2G -15ºC to 40ºC***

Accessory Notes

** The cooling coil can be continuously immersed in liquids up to 100ºC with the cooler switched off and may be used to cool liquid down from 100ºC but it is not designed for continuous operation above 40ºC.
*** Minimum operating temperature without accessory cooling is ambient +5ºC (amb.+ 15ºC for P5 and ST5 tanks).

Bridge Plates

For use with stainless steel and plastic tanks

Part No

Description

G-BTS Bridge plate fits G Optima heating circulator models to ST5 tank
G-BTL Bridge plate fits G Optima heating circulator models to ST12, 18, 26 & 38 tanks
G-BSS Bridge plate fits G Optima heating circulator models to S5 tanks
G-BSL Bridge plate fits G Optima heating circulator models to S12, 18, 26, 38 tanks
T-BTS Bridge plate replacement fits T Optima heating circulator models to ST5 tank
T-BTL Bridge plate replacement fits T Optima heating circulator models to ST12, 18, 26 & 38 tanks
T-BSS Bridge plate fits T Optima heating circulator models to S5 tank
T-BSL Bridge plate fits T Optima heating circulator models to S12, 18, 26 & 38 tanks
T-BYWS Bridge plate fits T Optima heating circulator models to Y6 & W6 tanks
T-BYWL Bridge plate fits T Optima heating circulator models to Y14, 28 & 38 tanks also W14, 28 & 38 tanks
G-BPS Bridge plate fits G Optima heating circulator models to P5 tank
G-BPL Bridge plate fits G Optima heating circulator models to P12 & 18
T-BPS Bridge plate replacement fits T Optima heating circulator models to P5 tank
T-BPL Bridge plate replacement fits T Optima heating circulator models to P12 & 18 tanks

 

Clamp

To attach heating circulators to any vertical sided tank

Part No

Description

T-CLAMP Allows heating circulator to be attached to virtually any vertical sided vessel with a maximum wall thickness of 35mm for rectangular tanks, 30mm for circular tanks (300mm diameter), and capacity up to 50L

Heated Circulating Bath – Lids

To help reduce evaporation / heat loss and avoid sample contamination*

Part No

Description

STL5 Flat stainless steel lid for 5L bath
STL12 Gabled, hinged (removable) stainless steel lid for 12L bath
STL26 Gabled, hinged (removable) stainless steel lid for 18L and 26L bath
STL38 Gabled, hinged (removable) stainless steel lid for 38L bath
PL5 Flat, stainless steel lid for 5L bath
PL12 Curved plastic lid for 12L bath
PL18 Curved plastic lid for 18L bath

Accessory Notes

* Between operating temperatures 60ºC and 100ºC and below room temperature a lid or layer of polypropylene spheres should be used.

Heated Circulating Bath – Racks

To optimise available bath capacity.

Part No

Tube size

Capacity

VR-13 Ø10-13 mm 65
VR-19 Ø16-19 mm 36
VR-24 Ø24 mm 23
VR-30 Ø30 mm 14
VR-SE 0.5 ml 102
VR-LE 1.5ml 75
QR-13 Ø10-13 mm 30
QR-19 Ø16-19 mm 16
QR-24 Ø24 mm 10
QR-30 Ø30 mm 5
QR-SE 0.5 ml 44
QR-LE 1.5 ml 35

Accessory Notes

Number of racks accommodated in stainless steel / plastic baths:

5 litres: 1 x QR
12 litres: 2 x VR
18 litres: 4 x VR
26 litres: 4 x VR
38 litres: 6 x VR

Polypropylene Spheres

Ideal alternative to a lid*

Part No

Description

Packs per bath

PS-20 Pack of 300 polypropylene spheres 1 x 5/12L, 2 x 18/26L, 3 x 38L

Accessory Notes

* Between operating temperatures 60ºC and 100ºC and below room temperature a lid or layer of polypropylene spheres should be used.

Pump Connectors

Optional

Part No

Description

P-M6 Replacement plastic pump inlet/outlet connector. Fits tubing 9mm inner dia. Temperature range -50 to 200ºC
P-M11 Replacement plastic pump inlet/outlet connector. Fits tubing 15mm inner dia. Temperature range -50 to 200ºC
M-SR4 Metal pump inlet/outlet connector, dual seal super rapid 4mm. Fits semi rigid tubing 4mm outer dia. Temperature range -20 to 100ºC
M-SR6 Metal pump inlet/outlet connector, dual seal super rapid 6mm. Fits semi rigid tubing 6mm outer dia. Temperature range -20 to 100ºC
M-SR8 Metal pump inlet/outlet connector, dual seal super rapid 8mm. Fits semi rigid tubing 8mm outer dia. Temperature range -20 to 100ºC
M-HB7 Metal pump inlet/outlet connector, hose barb 7mm. Fits flexible tubing 7mm inner dia. Temperature range -40 to 120ºC
M-HB9 Metal pump inlet/outlet connector, hose barb 9mm. Fits flexible tubing 9mm inner dia. Temperature range -40 to 120ºC
M-HB12 Metal pump inlet/outlet connector, hose barb 12mm. Fits flexible tubing 12mm inner dia. Temperature range -40 to 120ºC
M-UC Metal pump inlet/outlet plate, 1/4‘‘ BSP/G1/4 female. Temperature range -50 to 200ºC

Raised Shelves

To allow accommodation of shallow vessels

Part No

Description

RS14 For 12L bath
RS22 For 18L bath
RS28 For 26L or 38L bath
RS38 For 38L bath

Vertical Turbine Pump

Low noise, compact design. Supplied with pipe connections and special lid for fitting to tanks, pipe bore 12.7mm.

Part No

Description

VTP1-LT Maximum pressure 1000 mbar, Maximum flow 9 L/min
VTP2-LT Maximum pressure 1650 mbar, Maximum flow 12 L/min

Accessory Notes

Required only where application demands a higher pressure than that delivered by the internal pump to maintain flow.